michfood
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
ser@localhost ~]$ su
[root@localhost liveuser]# /media/DATA/ADATA/SF_Genesis_v1.7/SF_Genesis -PROCESS_SSD 4:0:0:0 /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/28199.0.driveconfig 1D4720126848 www_123 log=/media/DATA/ADATA/log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 11/28/2019 19:16:48] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/28199.0.driveconfig
argv[5]: 1D4720126848
argv[6]: www_123
argv[7]: log=/media/DATA/ADATA/log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 11/28/2019 19:16:48] - Instructing the operating system to purge any existing cached data for device: '4:0:0:0'
[Thu 11/28/2019 19:16:53] - Issuing a discovery command for device: '4:0:0:0'
[Thu 11/28/2019 19:16:58] - Discovery command completed...
[Thu 11/28/2019 19:16:58] - Waiting 5 seconds for the system to settle...
[Thu 11/28/2019 19:17:03] - Device designation string '4:0:0:0' is mapped to node '/dev/sg3'
[Thu 11/28/2019 19:17:03] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg3
MFP Package Filename = /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/28199.0.driveconfig
Serial No. = 1D4720126848
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 11/28/2019 19:17:03] - Successfully received the IDENTIFY data from the drive...
[Thu 11/28/2019 19:17:03] - Validating Manufacturing Firmware Package: /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Thu 11/28/2019 19:17:52] - Successfully opened the package: /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Thu 11/28/2019 19:17:52] - file /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/28199.0.driveconfig Loaded successfully
[Thu 11/28/2019 19:17:52] - Warning: Unable to query diagnostics information to perform power management settings check
[Thu 11/28/2019 19:17:52] - B01 Power Management configuration request detected
[Thu 11/28/2019 19:17:52] - Successfully extracted *.DriveConfig file: /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/28199.0.driveconfig
[Thu 11/28/2019 19:17:52] - Extracted Config_ID: 1 (28199) in DriveConfig file: /media/DATA/NEWFL/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/28199.0.driveconfig
[Thu 11/28/2019 19:17:52] - Extracted SerialOutputControl: 0
[Thu 11/28/2019 19:18:13] - Searching for flashware image for configuration 28199
[Thu 11/28/2019 19:18:13] - Manifest found for configuration 28199
[Thu 11/28/2019 19:18:13] - Flashware image extracted: 28199_fw_cl_mlc_Intel_64Gb_JS29F16B08CCMF3_1Q_2C_1D_S_PP_R01909_s512.vic
[Thu 11/28/2019 19:18:13] - Searching for manufacturing image for configuration 28199
[Thu 11/28/2019 19:18:13] - Manifest found for configuration 28199
[Thu 11/28/2019 19:18:13] - Manufacturing image extracted: 28199_mf_mlc_Intel_64Gb_JS29F16B08CCMF3_1Q_2C_1D_S_PP_R01909_s512.vic
[Thu 11/28/2019 19:18:13] - Proceeding in ROM mode, download feature 3...
[Thu 11/28/2019 19:18:13] - Successfully downloaded MFB to the drive...
[Thu 11/28/2019 19:18:13] - Waiting (5 sec) for the drive to settle...
[Thu 11/28/2019 19:18:18] - Successfully received the IDENTIFY data from the drive...
[Thu 11/28/2019 19:18:18] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Thu 11/28/2019 19:18:18] - Successfully enabled SMART capabilities...
[Thu 11/28/2019 19:18:20] - Successfully issued a diagnostic unlock...
[Thu 11/28/2019 19:18:21] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 125045424
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 34953 (0x8889)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 11/28/2019 19:18:29] - FORMAT command completed...
[Thu 11/28/2019 19:18:29] - Waiting (2 sec) for the drive to settle...
[Thu 11/28/2019 19:18:31] - Setting up the stamp information through CDU command...
[Thu 11/28/2019 19:18:34] - Waiting (2 sec) for the drive to settle...
[Thu 11/28/2019 19:18:36] - Downloading the flashware to the drive... feature 3
[Thu 11/28/2019 19:18:38] - Successfully downloaded flashware to the drive...
[Thu 11/28/2019 19:18:38] - Waiting (15 sec) for the drive to settle...
[Thu 11/28/2019 19:18:53] - Successfully received the IDENTIFY data from the drive...
[Thu 11/28/2019 19:18:53] - Firmware revision reported to be: '4.0.0 '
[Thu 11/28/2019 19:18:53] - Enabling SMART support...
[Thu 11/28/2019 19:18:53] - Issuing a diagnostic unlock to the drive...
[Thu 11/28/2019 19:18:55] - Setting up Max LBA settings...
[Thu 11/28/2019 19:18:59] - Change of sector size is not required, sector size is already set to 512
[Thu 11/28/2019 19:19:00] - Setting the serial number of the drive to: 1D4720126848
[Thu 11/28/2019 19:19:02] - Setting the World Wide Name (WWN) of the drive to: www_123
[Thu 11/28/2019 19:19:05] - Processing completed for device: 1D4720126848
[Thu 11/28/2019 19:19:05] - Begin collecting the device post-process log/information
[Thu 11/28/2019 19:19:05] - Creating the Log Bundle...
[Thu 11/28/2019 19:19:05] - Plain text identify log created
[Thu 11/28/2019 19:19:06] - Plain text diagnostics identify log created
[Thu 11/28/2019 19:19:07] - Plain text diagnostics information log created
[Thu 11/28/2019 19:19:08] - Plain text format information log created
[Thu 11/28/2019 19:19:08] - Plain text SMART log created
[Thu 11/28/2019 19:19:10] - Plain text manufacturing defect list log created
[Thu 11/28/2019 19:19:11] - Plain text grown defect list log created
[Thu 11/28/2019 19:19:12] - Plain text panic directory listing log created
[Thu 11/28/2019 19:19:12] - Completed collecting all plain text log files.
[Thu 11/28/2019 19:19:12] - End of logs and information collection
[Thu 11/28/2019 19:19:13] - Applying the remaining ConfigUniqueDrive settings...
[Thu 11/28/2019 19:19:14] - Setting Customer ID with value : 0
[Thu 11/28/2019 19:19:14] - Setting Diagnostic Unlock Key with value supplied
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 4096 Plus DIFF Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 4096 Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 512B Plus DIFF Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 512B Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 520B Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 524B Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Setting Max LBA Count for 528B Sectors with value : 0
[Thu 11/28/2019 19:19:14] - Total of 1 valid MaxLBA settings were setup to be written to the drive.
[Thu 11/28/2019 19:19:16] - Successfully applied the remaining ConfigUniqueDrive settings...
[Thu 11/28/2019 19:19:16] - Issuing an IdleImmediate command to the drive...
[Thu 11/28/2019 19:19:16] - Not an Enterprise drive,so, continuing without setting master password..
[Thu 11/28/2019 19:19:16] - End of Genesis manufacturing log.
[Thu 11/28/2019 19:19:16] - Exiting...
[Thu 11/28/2019 19:19:16] - Overall Result for Device: /dev/sg3 ****** PASS ******
[root@localhost liveuser]# ^C
[root@localhost liveuser]#
|
Всего записей: 3 | Зарегистр. 22-11-2019 | Отправлено: 13:25 01-12-2019 | Исправлено: michfood, 13:29 01-12-2019 |
|
