Evgenik67
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Уважаемые гуру стал в тупик не знаю что делать дальше при прошивке выдаёт следующее [root@localhost liveuser]# su [root@localhost liveuser]# lsscsi [0:0:0:0] disk ATA WDC WD2500BEVT-2 01.0 /dev/sda [1:0:0:0] cd/dvd Optiarc DVD RW AD-7585H KX04 /dev/sr0 [5:0:0:0] disk USB DISK 2.0 PMAP /dev/sdc [11:0:0:0] disk SandForc e{200026BB} /dev/sdb [root@localhost liveuser]# /media/DATA/5_SF_Genesis/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 11:0:0:0 /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/31038.0.driveconfig 12345 www_123 log=/media/DATA/5_SF_Genesis/log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/09/2022 13:19:19] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 11:0:0:0 argv[3]: /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/31038.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/media/DATA/5_SF_Genesis/log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/09/2022 13:19:19] - Instructing the operating system to purge any existing cached data for device: '11:0:0:0' [Tue 08/09/2022 13:19:24] - Issuing a discovery command for device: '11:0:0:0' [Tue 08/09/2022 13:19:29] - Discovery command completed... [Tue 08/09/2022 13:19:29] - Waiting 5 seconds for the system to settle... [Tue 08/09/2022 13:19:34] - Device designation string '11:0:0:0' is mapped to node '/dev/sg2' [Tue 08/09/2022 13:19:34] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg2 MFP Package Filename = /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp Configuration File = /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/31038.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/09/2022 13:19:34] - Successfully received the IDENTIFY data from the drive... [Tue 08/09/2022 13:19:34] - Validating Manufacturing Firmware Package: /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Tue 08/09/2022 13:19:38] - Successfully opened the package: /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Tue 08/09/2022 13:19:38] - file /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/31038.0.driveconfig Loaded successfully [Tue 08/09/2022 13:19:45] - B01 Power Management configuration request detected [Tue 08/09/2022 13:19:45] - B01 Power Management conforms to hardware version 0x0 [Tue 08/09/2022 13:19:45] - Successfully extracted *.DriveConfig file: /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/31038.0.driveconfig [Tue 08/09/2022 13:19:45] - Extracted Config_ID: 1 (31038) in DriveConfig file: /media/DATA/5_SF_Genesis/fw/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/31038.0.driveconfig [Tue 08/09/2022 13:19:45] - Extracted SerialOutputControl: 0 [Tue 08/09/2022 13:19:45] - Searching for flashware image for configuration 31038 [Tue 08/09/2022 13:19:45] - Manifest found for configuration 31038 [Tue 08/09/2022 13:19:45] - Flashware image extracted: 31038_fw_cl_mlc_Micron_128Gb_33bit_MT29F128G08CBECB_1Q_2C_1D_S_PP_R02800_s512.vic [Tue 08/09/2022 13:19:45] - Searching for manufacturing image for configuration 31038 [Tue 08/09/2022 13:19:45] - Manifest found for configuration 31038 [Tue 08/09/2022 13:19:45] - Manufacturing image extracted: 31038_mf_mlc_Micron_128Gb_33bit_MT29F128G08CBECB_1Q_2C_1D_S_PP_R02800_s512.vic [Tue 08/09/2022 13:19:45] - Proceeding in ROM mode, download feature 3... [Tue 08/09/2022 13:19:46] - Successfully downloaded MFB to the drive... [Tue 08/09/2022 13:19:46] - Waiting (5 sec) for the drive to settle... [Tue 08/09/2022 13:19:51] - Successfully received the IDENTIFY data from the drive... [Tue 08/09/2022 13:19:51] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful. [Tue 08/09/2022 13:19:51] - Successfully enabled SMART capabilities... [Tue 08/09/2022 13:19:53] - Successfully issued a diagnostic unlock... [Tue 08/09/2022 13:19:54] - Performing the flash test of block 0 (0x0000)... [Tue 08/09/2022 13:19:55] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 1 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 8 Number of failures: 8 Number of Passed with warnings: 0 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Tue 08/09/2022 13:19:55] - End of Genesis manufacturing log. [Tue 08/09/2022 13:19:55] - Exiting... [Tue 08/09/2022 13:19:55] - Overall Result for Device: /dev/sg2 ****** FAIL ****** [root@localhost liveuser]# ^C [root@localhost liveuser]# куда копать дальше? |