ambalino
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору [Wed 05/03/2023 15:44:06] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0' [Wed 05/03/2023 15:44:11] - Issuing a discovery command for device: '3:0:0:0' [Wed 05/03/2023 15:44:16] - Discovery command completed... [Wed 05/03/2023 15:44:16] - Waiting 5 seconds for the system to settle... [Wed 05/03/2023 15:44:22] - Device designation string '3:0:0:0' is mapped to node '/dev/sg0' [Wed 05/03/2023 15:44:22] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg0 MFP Package Filename = /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp Configuration File = /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33206.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/03/2023 15:44:22] - Successfully received the IDENTIFY data from the drive... [Wed 05/03/2023 15:44:22] - Validating Manufacturing Firmware Package: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp [Wed 05/03/2023 15:44:22] - Successfully opened the package: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp [Wed 05/03/2023 15:44:22] - file /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33206.0.driveconfig Loaded successfully [Wed 05/03/2023 15:44:22] - Warning: Unable to query diagnostics information to perform power management settings check [Wed 05/03/2023 15:44:22] - B01 Power Management configuration request detected [Wed 05/03/2023 15:44:22] - Successfully extracted *.DriveConfig file: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33206.0.driveconfig [Wed 05/03/2023 15:44:22] - Extracted Config_ID: 1 (33206) in DriveConfig file: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33206.0.driveconfig [Wed 05/03/2023 15:44:22] - Extracted SerialOutputControl: 0 [Wed 05/03/2023 15:44:22] - Searching for flashware image for configuration 33206 [Wed 05/03/2023 15:44:22] - Manifest found for configuration 33206 [Wed 05/03/2023 15:44:22] - Flashware image extracted: 33206_fw_cl_mlc_Micron_128Gb_33bit_FT16B08UCM1-3B_2Q_2C_1D_S_PP_R02796_s512.vic [Wed 05/03/2023 15:44:22] - Searching for manufacturing image for configuration 33206 [Wed 05/03/2023 15:44:22] - Manifest found for configuration 33206 [Wed 05/03/2023 15:44:22] - Manufacturing image extracted: 33206_mf_mlc_Micron_128Gb_33bit_FT16B08UCM1-3B_2Q_2C_1D_S_PP_R02796_s512.vic [Wed 05/03/2023 15:44:22] - Proceeding in ROM mode, download feature 3... [Wed 05/03/2023 15:46:28] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extended Error data: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ATA COMMAND : 0x0092 (146) ATA FEATURE : 0x0003 (3) Device Status: 0x0001 (1) Driver Status: 0x0000 (0) Host Status: 0x0008 (8) ~~~~~~~~~~~~~~ Sense Data: ~~~~~~~~~~~~~~ 0 - No Sense: 114 (0x72) OK 1 - Recovered Error: 11 (0x0B) FAIL 2 - Not Ready: 0 (0x00) OK 3 - Medium Error: 0 (0x00) OK 4 - Hardware Error: 0 (0x00) OK 5 - Illegal Request: 0 (0x00) OK 6 - Unit Attention: 0 (0x00) OK 7 - Data Protect: 14 (0x0E) OK 8 - Blank Check: 9 (0x09) OK 9 - Vendor Specific: 12 (0x0C) OK 10 - Copy Aborted: 0 (0x00) OK 11 - Aborted Command: 0 (0x00) OK 12 - Equal Comparison: 0 (0x00) NA 13 - Volume Overflow: 0 (0x00) NA 14 - Miscompare: 0 (0x00) OK 15 - Reserved: 128 (0x80) NA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ System Trace: ~~~~~~~~~~~~~~~~ [ 385.510836] sd 3:0:0:0: [sda] Add. Sense: No additional sense information [ 385.515676] ata4.00: disabled [ 390.524831] ata4: hard resetting link [ 390.829043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 390.829166] ata4.00: ATA-8: SandForce{200026BB}, 402ABBR0, max UDMA/133 [ 390.829178] ata4.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 390.831850] ata4.00: configured for UDMA/133 [ 390.831869] ata4: EH complete [ 390.832202] scsi 3:0:0:0: Direct-Access ATA SandForce{200026 402A PQ: 0 ANSI: 5 [ 390.835890] sd 3:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB) [ 390.835898] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 390.836100] sd 3:0:0:0: [sda] Write Protect is off [ 390.836107] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 390.836183] sd 3:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 390.838684] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 390.840474] sda: unknown partition table [ 390.850944] sd 3:0:0:0: [sda] Attached SCSI disk [ 407.002067] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 407.002083] ata4.00: failed command: DOWNLOAD MICROCODE [ 407.002100] ata4.00: cmd 92/03:38:00:00:02/00:00:00:00:00/00 tag 0 pio 28672 out [ 407.002104] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) [ 407.002111] ata4.00: status: { DRDY } [ 407.002124] ata4: hard resetting link [ 412.356032] ata4: link is slow to respond, please be patient (ready=0) [ 417.048045] ata4: COMRESET failed (errno=-16) [ 417.048061] ata4: hard resetting link [ 422.402036] ata4: link is slow to respond, please be patient (ready=0) [ 427.094078] ata4: COMRESET failed (errno=-16) [ 427.094095] ata4: hard resetting link [ 432.450116] ata4: link is slow to respond, please be patient (ready=0) [ 462.133041] ata4: COMRESET failed (errno=-16) [ 462.133060] ata4: limiting SATA link speed to 1.5 Gbps [ 462.133069] ata4: hard resetting link [ 462.438038] ata4: SATA link down (SStatus 0 SControl 310) [ 467.438076] ata4: hard resetting link [ 472.792062] ata4: link is slow to respond, please be patient (ready=0) [ 477.484042] ata4: COMRESET failed (errno=-16) [ 477.484059] ata4: hard resetting link [ 482.839044] ata4: link is slow to respond, please be patient (ready=0) [ 487.531039] ata4: COMRESET failed (errno=-16) [ 487.531055] ata4: hard resetting link [ 492.886037] ata4: link is slow to respond, please be patient (ready=0) [ 522.568039] ata4: COMRESET failed (errno=-16) [ 522.568058] ata4: hard resetting link [ 527.616035] ata4: COMRESET failed (errno=-16) [ 527.616047] ata4: reset failed, giving up [ 527.616054] ata4.00: disabled [ 527.616097] ata4: EH complete ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/03/2023 15:46:28] - End of Genesis manufacturing log. [Wed 05/03/2023 15:46:28] - Exiting... [Wed 05/03/2023 15:46:28] - Overall Result for Device: /dev/sg0 ****** FAIL **** Второй: [Wed 05/03/2023 15:51:34] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0' [Wed 05/03/2023 15:51:39] - Issuing a discovery command for device: '3:0:0:0' [Wed 05/03/2023 15:51:44] - Discovery command completed... [Wed 05/03/2023 15:51:44] - Waiting 5 seconds for the system to settle... [Wed 05/03/2023 15:51:49] - Device designation string '3:0:0:0' is mapped to node '/dev/sg0' [Wed 05/03/2023 15:51:49] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg0 MFP Package Filename = /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp Configuration File = /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33193.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/03/2023 15:51:49] - Successfully received the IDENTIFY data from the drive... [Wed 05/03/2023 15:51:49] - Validating Manufacturing Firmware Package: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp [Wed 05/03/2023 15:51:49] - Successfully opened the package: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp [Wed 05/03/2023 15:51:49] - file /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33193.0.driveconfig Loaded successfully [Wed 05/03/2023 15:51:49] - Warning: Unable to query diagnostics information to perform power management settings check [Wed 05/03/2023 15:51:49] - B01 Power Management configuration request detected [Wed 05/03/2023 15:51:49] - Successfully extracted *.DriveConfig file: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33193.0.driveconfig [Wed 05/03/2023 15:51:49] - Extracted Config_ID: 1 (33193) in DriveConfig file: /media/USB/NEWFL/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33193.0.driveconfig [Wed 05/03/2023 15:51:49] - Extracted SerialOutputControl: 0 [Wed 05/03/2023 15:51:49] - Searching for flashware image for configuration 33193 [Wed 05/03/2023 15:51:49] - Manifest found for configuration 33193 [Wed 05/03/2023 15:51:49] - Flashware image extracted: 33193_fw_cl_mlc_Micron_128Gb_FT16B08UCM1-3B_2Q_2C_1D_S_PP_R02775_s512.vic [Wed 05/03/2023 15:51:49] - Searching for manufacturing image for configuration 33193 [Wed 05/03/2023 15:51:49] - Manifest found for configuration 33193 [Wed 05/03/2023 15:51:49] - Manufacturing image extracted: 33193_mf_mlc_Micron_128Gb_FT16B08UCM1-3B_2Q_2C_1D_S_PP_R02775_s512.vic [Wed 05/03/2023 15:51:49] - Proceeding in ROM mode, download feature 3... [Wed 05/03/2023 15:51:50] - Successfully downloaded MFB to the drive... [Wed 05/03/2023 15:51:50] - Waiting (5 sec) for the drive to settle... [Wed 05/03/2023 15:51:55] - Successfully received the IDENTIFY data from the drive... [Wed 05/03/2023 15:51:55] - Firmware revision reported to be: '60AABBM0'. This indicates MFB download was successful. [Wed 05/03/2023 15:51:55] - Successfully enabled SMART capabilities... [Wed 05/03/2023 15:51:57] - Successfully issued a diagnostic unlock... [Wed 05/03/2023 15:51:58] - Performing the flash test of block 0 (0x0000)... [Wed 05/03/2023 15:52:01] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 2 Die Count: 1 Lane Count: 4 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0022 | N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 1 | 0x0022 | N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 1 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 1 | 0 | 3 | 0x0022 | N3,N5 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 16 Number of failures: 0 Number of Passed with warnings: 16 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/03/2023 15:52:01] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 468862128 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 33836 (0x842C) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 1 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/03/2023 15:52:09] - FORMAT command completed... [Wed 05/03/2023 15:52:09] - Waiting (2 sec) for the drive to settle... [Wed 05/03/2023 15:52:11] - Setting up the stamp information through CDU command... [Wed 05/03/2023 15:52:14] - Waiting (2 sec) for the drive to settle... [Wed 05/03/2023 15:52:16] - Downloading the flashware to the drive... feature 3 [Wed 05/03/2023 15:52:18] - FATAL_ERROR: Could not download flashware to the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extended Error data: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ATA COMMAND : 0x0092 (146) ATA FEATURE : 0x0003 (3) Device Status: 0x0001 (1) Driver Status: 0x0000 (0) Host Status: 0x0008 (8) ~~~~~~~~~~~~~~ Sense Data: ~~~~~~~~~~~~~~ 0 - No Sense: 114 (0x72) OK 1 - Recovered Error: 11 (0x0B) FAIL 2 - Not Ready: 0 (0x00) OK 3 - Medium Error: 0 (0x00) OK 4 - Hardware Error: 0 (0x00) OK 5 - Illegal Request: 0 (0x00) OK 6 - Unit Attention: 0 (0x00) OK 7 - Data Protect: 14 (0x0E) OK 8 - Blank Check: 9 (0x09) OK 9 - Vendor Specific: 12 (0x0C) OK 10 - Copy Aborted: 0 (0x00) OK 11 - Aborted Command: 4 (0x04) FAIL 12 - Equal Comparison: 0 (0x00) NA 13 - Volume Overflow: 0 (0x00) NA 14 - Miscompare: 0 (0x00) OK 15 - Reserved: 128 (0x80) NA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ System Trace: ~~~~~~~~~~~~~~~~ [ 412.356032] ata4: link is slow to respond, please be patient (ready=0) [ 417.048045] ata4: COMRESET failed (errno=-16) [ 417.048061] ata4: hard resetting link [ 422.402036] ata4: link is slow to respond, please be patient (ready=0) [ 427.094078] ata4: COMRESET failed (errno=-16) [ 427.094095] ata4: hard resetting link [ 432.450116] ata4: link is slow to respond, please be patient (ready=0) [ 462.133041] ata4: COMRESET failed (errno=-16) [ 462.133060] ata4: limiting SATA link speed to 1.5 Gbps [ 462.133069] ata4: hard resetting link [ 462.438038] ata4: SATA link down (SStatus 0 SControl 310) [ 467.438076] ata4: hard resetting link [ 472.792062] ata4: link is slow to respond, please be patient (ready=0) [ 477.484042] ata4: COMRESET failed (errno=-16) [ 477.484059] ata4: hard resetting link [ 482.839044] ata4: link is slow to respond, please be patient (ready=0) [ 487.531039] ata4: COMRESET failed (errno=-16) [ 487.531055] ata4: hard resetting link [ 492.886037] ata4: link is slow to respond, please be patient (ready=0) [ 522.568039] ata4: COMRESET failed (errno=-16) [ 522.568058] ata4: hard resetting link [ 527.616035] ata4: COMRESET failed (errno=-16) [ 527.616047] ata4: reset failed, giving up [ 527.616054] ata4.00: disabled [ 527.616097] ata4: EH complete [ 833.294647] sd 3:0:0:0: [sda] Stopping disk [ 833.294751] sd 3:0:0:0: [sda] START_STOP FAILED [ 833.294758] sd 3:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 833.295638] ata4: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen [ 833.295650] ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } [ 833.295668] ata4: hard resetting link [ 834.018058] ata4: SATA link down (SStatus 0 SControl 300) [ 834.018080] ata4: EH complete [ 838.304098] ata4: hard resetting link [ 838.609043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 838.609142] ata4.00: ATA-8: SandForce{200026BB}, 402ABBR0, max UDMA/133 [ 838.609150] ata4.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 838.611858] ata4.00: configured for UDMA/133 [ 838.611876] ata4: EH complete [ 838.612172] scsi 3:0:0:0: Direct-Access ATA SandForce{200026 402A PQ: 0 ANSI: 5 [ 838.616277] sd 3:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB) [ 838.616286] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 838.616494] sd 3:0:0:0: [sda] Write Protect is off [ 838.616501] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 838.616587] sd 3:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 838.618281] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 838.620021] sda: unknown partition table [ 838.630944] sd 3:0:0:0: [sda] Attached SCSI disk ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/03/2023 15:52:18] - End of Genesis manufacturing log. [Wed 05/03/2023 15:52:18] - Exiting... [Wed 05/03/2023 15:52:18] - Overall Result for Device: /dev/sg0 ****** FAIL **** | Всего записей: 1 | Зарегистр. 02-05-2023 | Отправлено: 11:41 04-05-2023 | Исправлено: ambalino, 12:03 04-05-2023 |
|