New777
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
А это чё такое! после прошивки пишет читает нормально, модель и серийник не изменяется и горит красный светодиод, инверсия LED не помогает, подходящий конфиг только 25919, суммы Феди и прочих файлов в порядке
http://ibb.co/1b5tJwf
[liveuser@localhost ~]$ su
[root@localhost liveuser]# lsscsi
[0:0:0:0] disk ATA SandForce{200026 402A /dev/sda
[6:0:0:0] disk USB DISK 2.0 PMAP /dev/sdc
[7:0:0:0] disk JetFlash TS4GJFV10 8.07 /dev/sdb
[root@localhost liveuser]# /media/SSD/SF_Genesis -PROCESS_SSD 0:0:0:0 /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25919.0.driveconfig 12345 www_123 log=/media/SSD/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 02/01/2010 01:32:06] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
argv[4]: /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25919.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/SSD/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 02/01/2010 01:32:06] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Mon 02/01/2010 01:32:11] - Issuing a discovery command for device: '0:0:0:0'
[Mon 02/01/2010 01:32:16] - Discovery command completed...
[Mon 02/01/2010 01:32:16] - Waiting 5 seconds for the system to settle...
[Mon 02/01/2010 01:32:21] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Mon 02/01/2010 01:32:21] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
Configuration File = /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25919.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 02/01/2010 01:32:21] - Successfully received the IDENTIFY data from the drive...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager::OpenExisting:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
HeaderCRC32: 1733689052,(6755FEDC)
_Package.Header.HeaderCRC32: 1733689052,(6755FEDC)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OverallCRC32: 1328277082,(4F2BE65A)
_Package.Header.OverallCRC32: 1328277082,(4F2BE65A)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 02/01/2010 01:32:21] - Successfully opened the package: /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/FW_PPRO_6_1_8_Release.1115287.release.0.mfp
[Mon 02/01/2010 01:32:21] - Successfully extracted *.DriveConfig file: /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25919.0.driveconfig
[Mon 02/01/2010 01:32:21] - Extracted Config_ID: 1 (25919) in DriveConfig file: /media/SSD/FW_PPRO_6_1_8_Release.1115287.release--0/Configuration_Files/25919.0.driveconfig
[Mon 02/01/2010 01:32:21] - Extracted SerialOutputControl: 0
[Mon 02/01/2010 01:32:21] - Successfully extracted Config record: 25919
[Mon 02/01/2010 01:32:21] - Successfully extracted flashware image: 25919_fw_cl_mlc_Toshiba_64Gb_TH58TEG7DDKBA4C_2Q_2C_1D_PP_R02788_s512.vic
[Mon 02/01/2010 01:32:21] - Successfully extracted manufacturing image: 25919_mf_mlc_Toshiba_64Gb_TH58TEG7DDKBA4C_2Q_2C_1D_PP_R02788_s512.vic
[Mon 02/01/2010 01:32:21] - Proceeding in ROM mode, download feature 1...
[Mon 02/01/2010 01:32:22] - Successfully downloaded MFB to the drive...
[Mon 02/01/2010 01:32:22] - Waiting (5 sec) for the drive to settle...
[Mon 02/01/2010 01:32:27] - Successfully received the IDENTIFY data from the drive...
[Mon 02/01/2010 01:32:27] - Firmware revision reported to be: '618ABBM0'. This indicates MFB download was successful.
[Mon 02/01/2010 01:32:27] - Successfully enabled SMART capabilities...
[Mon 02/01/2010 01:32:28] - Successfully issued a diagnostic unlock...
[Mon 02/01/2010 01:32:28] - Performing the flash test of block 0 (0x0000)...
[Mon 02/01/2010 01:32:30] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 3
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 12
Number of failures: 0
Number of Passed with warnings: 0
No. Passed without warnings: 12
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 02/01/2010 01:32:31] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 156301488
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 56984 (0xDE98)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 0
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 02/01/2010 01:32:52] - FORMAT command completed...
[Mon 02/01/2010 01:32:52] - Waiting (2 sec) for the drive to settle...
[Mon 02/01/2010 01:32:54] - Setting up the stamp information through CDU command...
[Mon 02/01/2010 01:32:57] - Waiting (2 sec) for the drive to settle...
[Mon 02/01/2010 01:32:59] - Downloading the flashware to the drive...
[Mon 02/01/2010 01:33:01] - Successfully downloaded flashware to the drive...
[Mon 02/01/2010 01:33:01] - Waiting (15 sec) for the drive to settle...
[Mon 02/01/2010 01:33:16] - Successfully received the IDENTIFY data from the drive...
[Mon 02/01/2010 01:33:16] - Firmware revision reported to be: 'EP701101'
[Mon 02/01/2010 01:33:16] - Enabling SMART support...
[Mon 02/01/2010 01:33:16] - Issuing a diagnostic unlock to the drive...
[Mon 02/01/2010 01:33:17] - Setting up Max LBA settings...
[Mon 02/01/2010 01:33:20] - Applying the remaining ConfigUniqueDrive settings...
[Mon 02/01/2010 01:33:21] - Setting 'Configuration ID' to '25919'
[Mon 02/01/2010 01:33:21] - Setting 'Customer ID' to '0'
[Mon 02/01/2010 01:33:21] - Setting 'Model No.' to 'SSD7EP7011-080-IGT-2'
Ошибка сегментирования (core dumped)
[root@localhost liveuser]# |
