exwein
Full Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
-PRODUCTIZE_SSD : To productize a target SSD drive. This is similar to PROCESS_SSD, with only difference being that the
MFB download, flash test and format are not performed. Only flashware download, programming of serial
number and WWN is performed on the drive.
Usage:
./SF_Genesis -PRODUCTIZE_SSD [DEVICE] [MFP_PACKAGE] [DRIVE_CONFIG_FILE] [SERIAL_NO] [WWN] [DIAG_KEY] [CID=IDENTIFY_FILE] [LOG=FILENAME]
DEVICE - Disk label to access (i.e. /dev/sg2).
MFP_PACKAGE - Manufacturing Distribution Package (*.MFP) to use.
DRIVE_CONFIG_FILE - Drive Configuration file (*.driveconfig) to use.
SERIAL_NO - Serial No. to assign to this SSD.
WWN - World Wide Name (WWN) to assign to this SSD
DIAG_KEY - The diagnostics unlock key to unlock the drive. it should be specified as a set of 16 hext bytes such
as "hh....hh". For example: "12 34 56 78 90 ab cd ef ff 1a 2a 3a 90 ab cd ef". If you have previously
processed a drive using the -PROCESS_SSD option, and the driveconfig file you used did specify a customized
diag key, you can supply it in this parameter. Genesis will attempt to extract the key from the driveconfig file
you have specified in this command, if it is blank or unspecified, it will use the DIAG_KEY value you supply here.
If you specify "NA", this parameter is ignored. If the driveconfig file does not conatin a valid key, or this
option is specified as "NA", then the Sandforce default key will be used.
CID= - (Optional) 512 Bytes binary Customer identify data to assign to this SSD
LOG= - Log filename to capture the activity. (i.e. LOG=SomeDirectory/SomeFilename) |
Всего записей: 599 | Зарегистр. 29-03-2016 | Отправлено: 19:40 06-09-2019 | Исправлено: exwein, 19:48 06-09-2019 |
|
