Samsung (Самсунг). Ремонт и восстановление накопителей. II - [31] :: Магнитные носители информации

Подскажите, после сбоя из-за сата шлейфа smart обзавелся таким логом, вернее это его часть

Код:

SMART Error Log Version: 1
ATA Error Count: 46 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 46 occurred at disk power-on lifetime: 206 hours (8 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 c0 01 00 40 Error: ICRC, ABRT 64 sectors at LBA = 0x000001c0 = 448

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 00 01 00 40 00 00:00:00.676 READ DMA
c8 00 00 00 00 00 40 00 00:00:00.676 READ DMA
c8 00 01 00 00 00 40 00 00:00:00.667 READ DMA
c8 00 01 80 00 00 40 00 00:00:00.667 READ DMA
c8 00 01 10 00 00 40 00 00:00:00.667 READ DMA

Error 45 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 01 00 40 Error: ICRC, ABRT at LBA = 0x00000100 = 256

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 00 01 00 40 08 00:00:01.910 READ DMA
60 02 00 00 00 00 40 00 00:00:01.910 READ FPDMA QUEUED
ef 02 00 00 00 00 40 00 00:00:01.910 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 40 00 00:00:01.910 SET FEATURES [Enable read look-ahead]
c6 00 10 00 00 00 40 00 00:00:01.910 SET MULTIPLE MODE

Error 44 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 c0 01 00 40 Error: ICRC, ABRT 64 sectors at LBA = 0x000001c0 = 448

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 e0 20 01 00 40 08 00:00:01.216 READ DMA
60 03 08 18 01 00 40 00 00:00:01.216 READ FPDMA QUEUED
60 00 08 10 01 00 40 00 00:00:01.216 READ FPDMA QUEUED
60 02 08 08 01 00 40 00 00:00:01.216 READ FPDMA QUEUED
ef 02 00 00 00 00 40 00 00:00:01.216 SET FEATURES [Enable write cache]

Error 43 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 c0 40 02 00 40 Error: ICRC, ABRT 192 sectors at LBA = 0x00000240 = 576

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 00 02 00 40 00 00:00:01.063 READ DMA
ef 02 00 00 00 00 40 00 00:00:01.063 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 40 00 00:00:01.063 SET FEATURES [Enable read look-ahead]
c6 00 10 00 00 00 40 00 00:00:01.063 SET MULTIPLE MODE
ef 10 02 00 00 00 40 00 00:00:01.063 SET FEATURES [Reserved for Serial ATA]

Error 42 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 c0 40 02 00 40 Error: ICRC, ABRT 192 sectors at LBA = 0x00000240 = 576

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 00 02 00 40 00 00:00:01.062 READ DMA
ef 02 00 00 00 00 40 00 00:00:01.062 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 40 00 00:00:01.062 SET FEATURES [Enable read look-ahead]
c6 00 10 00 00 00 40 00 00:00:01.062 SET MULTIPLE MODE
ef 10 02 00 00 00 40 00 00:00:01.062 SET FEATURES [Reserved for Serial ATA]

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

шлейф заменен, вопрос возможно ли удалить теперь эту инфу из smartа?
попробывал hutil отсюда http://files.hddguru.com/index.php?directory=Software/Samsung/HUTIL от fanatyk, посоветовали HUTIL>SMART>INITIALIZE SMART
но загрузившись и запустив утилиту я получил
Hutil doesn't support this model
Винт HD204UI

Модерирует : Akam1, Dr_StandBy, vertex4
Dekker (19-09-2012 13:53): http://forum.ru-board.com/topic.cgi?forum=84&topic=4258	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105